May 06, 2017 EPOXY COATING FOR A FORT COLLINS CITY BUILDING
EPOXY COATING PROJECT COMPLETE
We completed an epoxy coating project in the Fort Collins Power and Light office building this past month. The client chose to install the quarter inch Copper Mountain flake epoxy system, so that it would be easy to clean, durable to high traffic, and look good. The job was a big success! We transformed 15,000 square feet of rough and unlevel concrete that was previously carpeted into a beautiful, seamless, easy-to-clean floor. The client had decided on this application after having a previous section done and having seen how well it performed with workers walking through the area with muddy boots.
Prepwork is arguably the most important part of our trade, and with this floor, we needed to focus on repairing the surface so that it would be nice and flat for the coating to adhere. We moved old pieces of concrete that had broken due to the concrete settling and cracking over time, as well as we filled a lot of cracks and grinded the surface smooth. The floor also required moisture remediation after testing. The moisture remediation consisted of a special primer needing to be installed on the floor and extensive patching to ensure adhesion of the epoxy chip coating. The prepwork laid the foundation for a nice industrial floor coating.
The client chose this system to be installed in the high traffic areas, like hallways and large rooms, where people would gather and walk through often. They decided to carpet the offices, which can often be a good decision for a cozier feel for people’s workspaces. Concrete floors can be a nice addition to a mixture of flooring types, depending on what they will be used for. In this case, the city will be happy with the mixture of epoxy coating and carpet for their usage because the epoxy is industrial-strength and looks good, whereas the carpet does not get as much traffic and provides a nice environment in the office setting.
SOME THINGS TO CONSIDER WHEN CHOOSING AN EPOXY FLOOR APPLICATION…
Whenever our clients choose an epoxy for paint, we want to be clear that there could be odors associated with the resins we use, and really, you’re going to get this with any contractor. However, there are ways to reduce the odor, which is what we did in this case. Products were selected to reduce odors because part of the building was occupied. Another thing we want our clients to be aware of is the drying times, which can be longer or shorter depending on the temperature of the concrete and surrounding environment. Depending on the material used, our clients may be able to walk on it the next day, or it could take an additional day if it did not dry quick enough. Also, be careful and consult with us before you drive any machinery on the surface when we’re finished.
WE’D LOVE TO WORK WITH YOU ON YOUR NEXT CONCRETE COATING PROJECT!
Overall, we are pleased with the outcome and look forward to help warehouses, city buildings, gymnasiums, schools, airplane hangars, large garages, pole barns, get setup with an epoxy coating like this one, or other types of concrete coatings and polished concrete. We provide free estimates after you your project has been qualified over the phone. Call us today for your free estimate at 720-258-6571. We look forward to working with you.
CITY BUILDING EPOXY COATING GALLERY:
Check out these before and after pictures of this concrete coating project below. You’ll see some of the concrete repair, our machines that grind the concrete and collect the majority of the dust, and then the floor when it is complete! Wow! What a difference!